1.Measure the original window frame, and cut the strip sets to size. (See Guide figure 2)
2.Connect the PVC with corner connectors to make the screen frame, extend the length if needed.
3.Lay the mesh on assembled screen frame and secure it with grooved magnetic strip.
4.Cut off the excessive mesh around, and place the magnetic tape on top.
5.Lift the protective film on the magnetic strip, and place the wind clip on, then put the protective film back on.
6.Clean the original window frame, make sure it's clean and dry.
7.Peel the protective film on top and attach to the window frame, adjust before mount it on completely.