Design for cutting LVP ,WPC , LVT, VCT, PVC, Vinyl Plank Flooring. It is not suitable for cutting SPC(SPC is called Rigid Core Vinyl Flooring),Laminate,Engineered floor or hard plank.The floor has nothing to do with thickness. It is related to the material. If the material cannot be cut, even if it is thin, it cannot be cut. So don't try to cut the floor that is not in range (see Figure 5 on the left). If the floor you bought is very hard, be sure to ask the seller if it contains stone powder.
No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time.
Straight cut, Angle cut; " L & ?" cut and Lengthwise cut(Solve the installation of wall and corner).Clearly marked measuring guide. 0-45° Angle Cutting, Translational cutting,the deep of the throat is 115mm/4.5inch.Easy to use and to carry around. Better than 12-In Vinyl Tile Cutter?
2.2mm thick tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade (did flooring on about 2000 square feet), Otherwise it will quickly end the service life?man-made damage is not covered by the warranty
1x Body, 1x handle, 1x handle base, 2x bolts m8*35, 2x hex wrenches, 1x Oilstone,1x Guide block, 1x Operation manual. SPC has a stone powder composition, the material is brittle and high in hardness, so it will crack. Once again, the customer is reminded that this can't cut SPC (Rigid Core Vinyl Flooring) floor.